Mprog Multi Device Eeprom Programmer 3.0 Free.rar ~REPACK~
Mprog Multi Device Eeprom Programmer 3.0 Free.rar
once the device has been loaded, mprog will display the device information and begin programming. if you press the button, it will switch to program mode, and will wait for you to select the programming target:
- eeprom : eeprom bootloader of 0x0 which is default (should be good for new devices)
- device : device bootloader of 0xe which is default (only for some devices). if set to this option, the eeprom will be the sandisk partition, and the device will be the usb interface. for this option to work, the first bootloader must be deleted.
- i/o : usb2.0 internal memory
- usb : usb mass storage
- hid : usb2.0 keyboard/mouse (not compatible with windows)
- linux : linux usb mass storage, if the partition is empty
hey i have problem i need flash a driver to eeprom. in one site give me a txt from the eeprom. then the devices is boot correctly. then i send the txt for the next site. when i need flash the soft. the same problem. do this no flash the soft. i tried to connect to other serial ports and with other soft. i tried to write on eprom. back to c:\program files\eeprom programmer\ and when i try to write the. or program the eeprom. the manual said to copy this eeprom. with the driver provided by the site.
if the device is not detected, running “loader.exe” will allow the user to manually configure the usb vid/pid to match the device. there is also an option to automatically determine the device. when the device is located, it will be displayed in the main window. if the device is blank, it can be loaded with “efistub.exe” or “raw.exe”.
using the new eeprom editor, you can modify the contents of an eeprom that is generated by your ftdi device. you can also read and display the contents of the eeprom. 3. using the eeprom editor and dump.bin.
in the file eeprom editor options, you can set how much data is displayed, the conversion rate, and the.bin file from which the.ewi file reads data. the.ewi file will be created or modified. in the editor window, select the data to be displayed by clicking on the filename and then double-clicking on the.
mprog 4 (free) mprog is a eeprom programming utility for use with the ft232bm and ft232r usb to eeprom interfaces. mprog does not require a graphics. display to operate.. but an ascii character. window style interface. mprog is. an easy to use multiple device eeprom programming utility for use. mprog is a gui program with the following. functions: – 3 window gui for online programming; – eprom file selection for offline programming; – easy to use interface for online programming; – read/write functions for online programming; – erase and write functions for offline programming.
mprog 4. free. mprog is a eeprom programming utility for use with the ft232bm and ft232r usb to eeprom interfaces. mprog does not require a graphics display. to operate.. but an ascii character. window style interface. mprog is a gui program with the following. functions: – 3 window gui for online programming; – eprom file selection for offline programming; – easy to use interface for online programming; – read/write functions for online programming; – erase and write functions for offline programming.