Eyetoy Usb Camera Namtai Driver Windows 10 32 20 UPD


Eyetoy Usb Camera Namtai Driver Windows 10 32 20

i have already tried using the eyetoy 2.0m camera on both windows xp and windows vista, but it doesn’t work on either. i have looked on the internet and have tried a number of things, such as getting a different driver from the manufacturer’s site, but it hasn’t worked.

i have the same problem. i want to use my eyetoy on my computer. i have windows vista. but it does not work. i have downloaded and installed the driver from the eyetoy site. i have checked that my computer and eyetoy are in the same network, but it does not work.

i want to use my eyetoy on my computer. i have windows vista. but it does not work. i have downloaded and installed the driver from the eyetoy site. i have checked that my computer and eyetoy are in the same network, but it does not work.

click the start button, then click run. type cmd in the open dialog box, and press enter. (if you do not see an open dialog box, press the windows key on the keyboard, then click the start button to open the start menu.)

if you see a command prompt window, press enter to continue. if you do not see a command prompt window, you need to install windows operating system, which you can do from the cd you have in the playstation eyetoy. if you are installing windows for the first time, you will need to create a user account for yourself and provide a user name and password.

this command will tell you the ps2 eyetoy can be used with your computer. you will need to download a driver and install it on your computer. the best way to do this is to use the dvd or cd you received with your playstation eyetoy. if you don’t have a dvd or cd, you can download the driver from the youtube video below, or you can download the driver from the site that was mentioned in the youtube video, and then copy the file and paste it into your hard disk. it will be a.inf file. the file will need to be placed in the same folder you extracted the files from the dvd or cd. if you have a dvd, you can copy the dvd to your hard disk and then open the copied dvd with a dvd player program and copy the file to your hard disk.

Carefully disconnect the camera from your PC. Slide the casing back down and put it in your pocket or bag. Make a note of where the camera was last plugged in, if you get to a computer you can check where it was plugged in by opening your computer’s Device Manager and looking for a USB device connected to your USB port. If you can’t find the camera that’s no problem as you will be sure to plug it in again soon.
Now its time to get the camera working, once plugged in, connect it to your computer’s USB port and run ‘Device Manager’ from the control panel. You should see a small icon listed as a ‘USB Root Hub’ (in my case there is only 1) underneath ‘Arduino’. Right-click and select Update Driver Software and follow the wizard. It should install the driver for you, if it doesn’t you might want to do some research on the issue. If it does work make sure that the quality setting on your camera is set to high. You can do this by clicking on the camera icon in the system tray (right click and select ‘properties’, option 4 in the window that pops up). This will bring up the main’settings’ program which shows the quality setting. You should be able to select the highest setting here.
Now that you’ve installed the driver and configured your camera you should be ready to switch it on and use it for the first time. First open your web browser, you might want to check www.eyenet.org in case there is any instruction there. Connect the camera to your computer as described earlier and from within the Windows XP computer you can now close the device manager and the device manager will tell you your camera is no longer detected. To use the camera plug it in to the computer and run ‘Device Manager’ again. This should show the camera again. Click on the ‘USB Root Hub’ option under the Arduinobox entry and select ‘Update Driver Software’. The update will scan the available device drivers. Select the one called ‘Logitech QuickCam Digital Video, USB Camera’ and click on the ‘Update Driver’ button. You should now be able to open the camera in your web browser to access the webcam page.


Eyetoy Usb Camera Namtai Driver Windows 10 32 20 UPD

Leave a Reply

Your email address will not be published. Required fields are marked *